For semi-removable film label constructions
Product codeFL-4561
Semi-Removable Film Adhesive
Water-based semi-removable film adhesive for labels that need stronger holding than light removable systems.
Application fit highlights
Why evaluate FL-4561 for your application
Not a universal no-residue promise
Confirm with bottle surface, film, dwell time, and storage condition
What this product is for
FL-4561 is a semi-removable PSA route for PET and BOPP film label applications where stronger holding is needed than a light removable adhesive, while removal behavior still needs dwell-time testing.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- PET bottle labels
- BOPP film labels
- Positioning labels
Suitable substrates
PETBOPPPPPESynthetic paper
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based acrylic pressure sensitive adhesive
Application directionPET bottle labels, BOPP film labels, semi-removable film labels
SubstratesPET, BOPP, PP, PE and synthetic paper label constructions
Data boundaryConfirm final peel, tack and holding data by TDS and customer-side testing
Process notes and first trial checks
Match the adhesive with the actual facestock, liner, printing layer and target container surface.
Evaluate removal after agreed dwell time, temperature exposure and storage condition.
Check die cutting, edge cleanliness and adhesive bleed before production use.
Frequently asked questions
What applications is FL-4561 Water-Based Semi-Removable Film Adhesive suitable for?
FL-4561 Water-Based Semi-Removable Film Adhesive is positioned for PET bottle labels, BOPP film labels, Positioning labels. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
TDS or SDS support can be provided after the application route and document need are confirmed.
Common failure modes
- Removal becomes too difficult after storage
- Label lifting when holding strength is too low
- Residue on bottle or film surface
- Edge bleed during converting or storage
Sample request checklist
- Film label structure and liner
- Target bottle or package surface
- Expected holding strength
- Removal requirement after dwell time
- Aging and storage condition
Related product comparison
Use FL-5068 when cleaner removal is the main requirement.Use AC-5309H when the project needs a stronger permanent PSA direction.
Related applications
Film Label Adhesive
Film label adhesive selection should match facestock, liner, coating method, target surface, aging condition and the required balance between holding and removability.
Protective Film Adhesive
Protective film adhesive selection depends on film type, protected surface, dwell time, storage environment and removal method.
Related technical resources
How to Choose Water-Based PSA for Film Labels
Film label PSA selection starts from facestock, liner, target surface, coating method and the required balance between holding and removability.
Why Removable Adhesives Need Dwell-Time Testing
A removable adhesive can look acceptable in a short test and still change after storage, heat exposure or long dwell time on the final surface.
Related products
FL-5068 Water-Based Removable Film Adhesive
Water-based removable adhesive for protective film, removable labels and temporary positioning where peel growth and residue must be checked under real use conditions.
AC-5309H High-Performance Film Label PSA
Acrylic emulsion for higher-grade film labels and fine label printing applications.
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- Film label structure and liner
- Target bottle or package surface
- Expected holding strength
- Removal requirement after dwell time
- Aging and storage condition