Film Labels & Tapes

Film labels, tapes and self-adhesive decorative films need adhesive matching around film, liner, coating method, target surface, aging and converting requirements.

Request Sample Request TDS / SDS

Application illustration of clear BOPP packaging tape, film tape rolls and a sealed carton

Application requirements

What the adhesive route needs to handle

Film and liner matchingCoating process compatibilityPeel, tack and shear balanceEdge and appearance control

Common substrates

PETBOPPPPPEPVCPaperGlassHDPE containersBuilding panels

Common failure problems

Label or film lifting
Adhesive bleed
Poor wet-out
Residue or surface damage
Unclear removable boundary

Selection logic

Start with the use case, then narrow the route by substrate, process window and failure mode.

Removable, semi-removable or permanent directionFilm appearance and constructionDie cutting or liner releaseStorage and aging condition

Testing suggestions

Test with the real facestock and liner

Check die cutting, edge bleed and label lifting

Confirm peel after storage and aging

Recommended models

FL-5068

FL-5068 Water-Based Removable Film Adhesive

Water-based removable adhesive for protective film, removable labels and temporary positioning where peel growth and residue must be checked under real use conditions.

Review product fit FL-4561

FL-4561 Water-Based Semi-Removable Film Adhesive

Water-based semi-removable film adhesive for labels that need stronger holding than light removable systems.

Review product fit AC-5309H

AC-5309H High-Performance Film Label PSA

Acrylic emulsion for higher-grade film labels and fine label printing applications.

Review product fit AC-5829L

AC-5829L General Water-Based Pressure-Sensitive Adhesive

Water-based acrylic PSA emulsion for general film tape and packaging tape applications.

Review product fit 917H

917H PVC Decorative Film PSA

Water-based pressure-sensitive adhesive route for PVC decorative films used on building-material panels, including wood-grain and marble-pattern finishes.

Review product fit

Related technical resources

How to Choose Water-Based PSA for Film Labels

Film label PSA selection starts from facestock, liner, target surface, coating method and the required balance between holding and removability.

Request a sample for this application

Send us your substrate, coating method and current bonding problem. We will suggest a sample route before sending detailed TDS.

Prepare Sample Request Ask a technical question

Information to include

Facestock and liner
Target surface
Coating method
Removal or holding target
Document needs