Helps hold fabric flat before printing
Product codeAC-5305D
Platen Printing Positioning Adhesive
Water-based acrylic pressure-sensitive adhesive for holding fabric and garment panels flat during manual or machine platen printing trials.
Application fit highlights
Why evaluate AC-5305D for your application
Screens positioning hold against clean release
Checks transfer, residue and recoating on the actual platen
Application risks
Problems to check before bulk production
Fabric shifts during printing
Insufficient or uneven hold can affect registration, edge position and print repeatability.
Release is too difficult
The trial should balance positioning strength with practical fabric removal after the real production interval.
Adhesive transfers or the platen becomes difficult to clean
Platen finish, coating amount, drying and repeated cycles can change residue and recoating behavior.
Small samples do not represent production
Fabric batch, platen condition, line heat and cleaning cycle should be recorded before scale-up.
What this product is for
AC-5305D is a water-based acrylic pressure-sensitive adhesive for positioning fabric and garment panels on manual or machine printing platens. The trial balances flat, stable holding during printing with practical release, platen condition and repeated production cycles.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- Manual platen printing
- Machine platen printing
- Garment-panel positioning
- Temporary textile positioning
Suitable substrates
Cotton fabricSynthetic fabricBlended fabricCompatible printing-table surfaces
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based acrylic pressure-sensitive adhesive
Application directionManual or machine platen printing and temporary garment-panel positioning
Typical substratesCotton, synthetic and blended fabrics with the actual printing-platen surface
Data boundaryDetailed application and product data should be confirmed through TDS and line testing
Process notes and first trial checks
Confirm platen material and whether the adhesive is brushed, rolled, sprayed or otherwise applied in the current printing process.
Check hold during printing and release after the actual production interval, heat exposure and cleaning cycle.
Inspect adhesive transfer, residue, platen contamination and fabric distortion after removal.
Repeat the trial through several coat, print, release and cleaning cycles before scale-up.
Frequently asked questions
What applications is AC-5305D Water-Based Platen Printing Positioning Adhesive suitable for?
AC-5305D Water-Based Platen Printing Positioning Adhesive is positioned for Manual platen printing, Machine platen printing, Garment-panel positioning, Temporary textile positioning. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
TDS or SDS support can be provided after the application route and document need are confirmed.
Common failure modes
- Fabric movement during printing
- Excessive tack or difficult release
- Adhesive transfer or residue
- Holding variation after repeated cleaning
Sample request checklist
- Manual or machine printing process
- Fabric construction, weight and finish
- Printing-platen material and surface condition
- Application method and coating amount
- Hold and release target
- Cleaning method and production interval
Related product comparison
Use label-focused PSA routes when facestock, liner and converted-label performance are the primary decision factors.Use a sample trial to balance positioning hold against release and cleaning behavior.
Testing disclaimer
Positioning and release depend on fabric, platen surface, coating, drying, heat, dwell and cleaning. Confirm the route through repeated trials under the buyer's production conditions.
Related applications
Related products
FL-5068 Water-Based Removable Film Adhesive
Water-based removable adhesive for protective film, removable labels and temporary positioning where peel growth and residue must be checked under real use conditions.
FL-4561 Water-Based Semi-Removable Film Adhesive
Water-based semi-removable film adhesive for labels that need stronger holding than light removable systems.
AC-5309H High-Performance Film Label PSA
Acrylic emulsion for higher-grade film labels and fine label printing applications.
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- Manual or machine printing process
- Fabric construction, weight and finish
- Printing-platen material and surface condition
- Application method and coating amount
- Hold and release target