Label and film coating route for paper, PET and BOPP constructions
Product codePA-5308
Paper and Film Label Pressure-Sensitive Adhesive
Water-based acrylic PSA direction for paper labels, PET/BOPP film labels and release-liner constructions, with the final formulation matched after line and material review.
Application fit highlights
Why evaluate PA-5308 for your application
Coating stability checked with the buyer's equipment and liner
Peel, edge bleed and converting checks after conditioning
Application risks
Problems to check before bulk production
Film and liner do not convert as expected
Facestock treatment and liner release can change coating, die cutting and final peel behavior.
Coating is unstable on the production line
Equipment, viscosity route, coat weight, line speed and drying must be reviewed as one process.
Edge bleed appears after storage
Initial appearance is not enough; converted labels should be conditioned before edge and roll checks.
Peel or holding changes after aging
The final label construction needs the buyer's storage, temperature and target-surface test.
What this product is for
PA-5308 is a water-based PSA direction for paper labels, PET/BOPP film labels and release-liner constructions. A suitable formulation is matched after reviewing the coating line, facestock, liner, drying window and final target surface.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- Paper labels
- PET and BOPP film labels
- Release-liner constructions
- Film-to-paper lamination
Suitable substrates
Paper facestockPET and BOPP filmRelease paperGlassine paperSelected lamination structures
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based acrylic pressure-sensitive adhesive
Application directionPaper labels, film labels, release-liner coating and film-to-paper lamination
Typical substratesPaper, PET, BOPP, release paper, glassine paper and selected textile constructions
Data boundaryDetailed ranges and document availability are confirmed after the application route is reviewed
Process notes and first trial checks
Confirm coating equipment, target coat weight, line speed and drying window before a production trial.
Test the actual facestock and release liner because liner release can change converting and peel results.
Check edge bleed, die cutting, peel and holding after the agreed storage or aging condition.
Keep the selected formulation and approved line conditions together in the production record.
Frequently asked questions
What applications is PA-5308 Paper and Film Label PSA suitable for?
PA-5308 Paper and Film Label PSA is positioned for Paper labels, PET and BOPP film labels, Release-liner constructions, Film-to-paper lamination. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
Document availability should be confirmed for this product direction before release.
Common failure modes
- Unstable coating caused by viscosity or equipment mismatch
- Poor release from the liner
- Edge bleed after storage
- Peel or holding result changes after aging
Sample request checklist
- Facestock and release liner
- Coating method, line speed and target coat weight
- Target bottle, package or bonding surface
- Peel, tack, holding or heat requirement
- Required documents and expected trial quantity
- Storage, aging and converting acceptance method
Related product comparison
Compare with AC-5309H when label appearance and a stronger film-label route are the main priorities.Compare with AC-5829L for general tape and film PSA applications.
Testing disclaimer
PA-5308 covers a shared paper-label and film-label application direction. The supplied formulation and final performance must be confirmed on the buyer's facestock, liner, coating line and target surface.
Related applications
Film Label Adhesive
Film label adhesive selection should match facestock, liner, coating method, target surface, aging condition and the required balance between holding and removability.
Film Labels & Tapes
Film labels, tapes and self-adhesive decorative films need adhesive matching around film, liner, coating method, target surface, aging and converting requirements.
Related technical resources
Related products
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- Facestock and release liner
- Coating method, line speed and target coat weight
- Target bottle, package or bonding surface
- Peel, tack, holding or heat requirement
- Required documents and expected trial quantity