One pressure-sensitive adhesive model for decorative-film and packaging-material coating routes
Product codeCF-6078
Decorative Film & Packaging Pressure-Sensitive Adhesive
Water-based pressure-sensitive adhesive for pre-coated self-adhesive PVC decorative films and packaging covering or lining materials used with release liner.
Application fit highlights
Why evaluate CF-6078 for your application
Applied to the material back, dried and paired with release liner before final use
Film, covering material, liner, drying and final substrate are confirmed by application testing
Application risks
Problems to check before bulk production
The liner releases poorly or adhesive transfers
Liner release level, coating uniformity, drying and rewinding or stacking pressure should be checked as one construction.
Edges or corners lift after application
Film memory, material stiffness, target-surface condition, box geometry and conditioning can change final holding.
The finished surface shows bubbles, wrinkles or unevenness
Coat weight, drying, application pressure and the flatness of the target panel or box board can affect appearance.
One material works but another does not
PVC formulations, printed papers, coated coverings, lining materials and target surfaces are not assumed interchangeable.
What this product is for
CF-6078 is a water-based pressure-sensitive adhesive used to prepare liner-backed self-adhesive materials. The same model can be evaluated for PVC decorative film and for packaging covering or lining materials, while each construction still needs its own coating, drying, liner and finished-application test.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- Self-adhesive PVC decorative film
- Gift-box outer covering
- Gift-box inner lining
- Pre-coated packaging materials
Suitable substrates
PVC decorative filmPrinted and coated paperDecorative covering and lining materialsRelease liner
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based pressure-sensitive adhesive
Application directionSelf-adhesive PVC decorative film and pre-coated packaging covering or lining materials
Typical constructionFace material, dried CF-6078 adhesive layer, release liner and final target substrate
Data boundaryFinal release, peel, holding and appearance require finished-construction testing
Process notes and first trial checks
Identify whether the project uses PVC decorative film, gift-box outer covering or inner-lining material, and record its coating, printing and back-surface treatment.
Apply CF-6078 to the back of the selected material, then record coat weight, line speed and the complete drying window before liner lamination.
Match the release liner to the dried adhesive layer and check release, transfer, blocking and handling after storage.
Apply the finished self-adhesive material to the real panel, box board or lining surface and review edges, corners, appearance and holding after conditioning.
Frequently asked questions
What applications is CF-6078 Decorative Film & Packaging PSA suitable for?
CF-6078 Decorative Film & Packaging PSA is positioned for Self-adhesive PVC decorative film, Gift-box outer covering, Gift-box inner lining, Pre-coated packaging materials. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
TDS or SDS support can be provided after the application route and document need are confirmed.
Common failure modes
- Poor wet-out on the film or covering-material back
- Incomplete drying, blocking or liner-release problems
- Bubbles, wrinkles or uneven finished appearance
- Edge or corner lifting after conditioning
- Adhesion change caused by PVC formulation, coating or substrate differences
Sample request checklist
- PVC film, covering material or lining material sample
- Printing, coating and adhesive-side treatment
- Release-liner sample or specification
- Coating equipment, target coat weight and drying window
- Final panel, box board or lining surface
- Release, peel, holding, appearance and aging acceptance method
Related product comparison
Use the PVC decorative-film application route when the final product is a liner-backed self-adhesive building-material film.Use the gift-box covering and lining route when the pre-coated material is applied during outer wrapping or inner-lining work.Compare with 233A when adhesive is applied directly during color-box or gift-box assembly instead of being pre-coated, dried and liner-backed.
Testing disclaimer
CF-6078 supports more than one pressure-sensitive application route, but final performance depends on the actual face material, coating and drying process, release liner, target substrate and aging condition. Confirm each finished construction by sample testing.
Related applications
PVC Decorative Film Pressure-Sensitive Adhesive
Self-adhesive PVC decorative film for building materials should be selected around the printed film, adhesive-side treatment, release liner, coating and drying process, target panel and aging condition.
Gift Box Covering & Lining Pressure-Sensitive Adhesive
A pre-coated gift-box route in which adhesive is applied to the back of the covering or lining material, dried, paired with release liner, then used for outer wrapping or inner lining.
Related products
FL-5068 Water-Based Removable Film Adhesive
Water-based removable adhesive for protective film, removable labels and temporary positioning where peel growth and residue must be checked under real use conditions.
FL-4561 Water-Based Semi-Removable Film Adhesive
Water-based semi-removable film adhesive for labels that need stronger holding than light removable systems.
AC-5309H High-Performance Film Label PSA
Acrylic emulsion for higher-grade film labels and fine label printing applications.
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- PVC film, covering material or lining material sample
- Printing, coating and adhesive-side treatment
- Release-liner sample or specification
- Coating equipment, target coat weight and drying window
- Final panel, box board or lining surface