Keeps the trial focused on surface hold rather than paper soak-in
Product codePF-2561
Paper Flocking Adhesive
Water-based paper flocking adhesive for gift boxes, greeting cards and paper crafts where absorption, pattern definition and paper deformation need to be controlled together.
Application fit highlights
Why evaluate PF-2561 for your application
Checks pattern edges, paper deformation and finished appearance
Uses the buyer's screen-printing and drying conditions
Application risks
Problems to check before bulk production
Adhesive soaks into the paper
Too little film remains at the surface, so clean-off or rubbing can expose the base and release flock.
Fine pattern edges become fuzzy
Screen, adhesive flow and the finished paper surface need to match for text and detailed graphics.
Paper warps or affects later converting
Coat amount and drying rhythm can interfere with folding, die cutting, lamination or box assembly.
A new paper batch changes the result
Paper weight, ink, varnish, UV coating, lamination and foil areas can all change wet-out and adhesion.
What this product is for
PF-2561 is a water-based paper flocking adhesive for gift boxes, greeting cards and paper crafts where adhesive soak-in, pattern definition, paper deformation and flock anchoring need to be balanced on the finished paper surface.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- Gift box flocking
- Paper packaging flocking
- Greeting cards
- Printed paper crafts
Suitable substrates
PaperPaperboardPrinted paperCoated or laminated paper after testing
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based paper flocking adhesive
Application directionGift boxes, paper packaging, greeting cards and crafts
Typical substratesPaper, paperboard, coated paper and printed packaging surfaces
Data boundaryPenetration and appearance depend on paper construction, coating and drying
Process notes and first trial checks
Use the actual paper, printed layer or surface coating because absorption can vary significantly.
Use the buyer's screen and pattern to compare coverage, fine edges and paper deformation.
Record the interval from adhesive application to flocking and reproduce the production drying rhythm.
After full drying and clean-off, inspect exposed base, pattern edges, folds, creases and rubbing.
Frequently asked questions
What applications is PF-2561 Paper Flocking Adhesive suitable for?
PF-2561 Paper Flocking Adhesive is positioned for Gift box flocking, Paper packaging flocking, Greeting cards, Printed paper crafts. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
TDS or SDS support can be provided after the application route and document need are confirmed.
Common failure modes
- Excessive penetration and exposed base
- Fuzzy or incomplete pattern edges
- Paper warping or deformation
- Uneven flock density
- Weak anchoring after clean-off, folding or rubbing
Sample request checklist
- Actual paper, weight and absorption
- Printing, varnish, UV, lamination or foil details
- Pattern and screen information
- Flock fiber, length and density
- Flocking interval and drying condition
- Appearance, fold, crease and rubbing test
Testing disclaimer
Paper flocking results depend on the finished paper surface, screen, pattern, flock, coating and drying. Approve the route with the buyer's production paper and converting checks.
Related applications
Related technical resources
Water-Based Flocking Adhesive Selection by Substrate
Flocking adhesive selection changes when the substrate moves from paper or ABS to flexible PVC, PP, PE, metal or glass.
Flocking Adhesive Film Thickness and Open Time
Flocking adhesive film thickness and open time affect fiber anchoring, surface feel, drying speed and failure risk after rubbing or aging.
Related products
HF-5082 Foam Flocking Adhesive
Water-based foam flocking adhesive for sponge, toy parts and packaging inserts where penetration, hand feel and fiber anchoring must be balanced.
AF-4588 ABS Plastic Flocking Adhesive
Water-based flocking adhesive for ABS housings and rigid ABS parts after surface cleaning and production-part testing.
VF-4588 PVC Plastic Flocking Adhesive
Water-based flocking adhesive for PVC toys, footwear materials and other PVC parts, with formulation and plasticizer effects included in testing.
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- Actual paper, weight and absorption
- Printing, varnish, UV, lamination or foil details
- Pattern and screen information
- Flock fiber, length and density
- Flocking interval and drying condition