Use both production substrates
Flexible Material Lamination Adhesives
Flexible-material lamination should be matched around the two substrates, coating method, line speed, drying window and the final bond test after conditioning.
Application requirements
What the adhesive route needs to handle
Both substrates identifiedWet-out and coat-weight controlDrying window confirmationFinal bond after conditioning
Common substrates
PU foamSpongeFabricPVC decorative filmPaperboardPackaging inserts
Common failure problems
- Poor wet-out
- Edge lifting
- Delamination after aging
- Blocking
- Slow drying
Selection logic
Start with the use case, then narrow the route by substrate, process window and failure mode.
Substrate pairCoating methodLine speed and dryingWater or heat exposure target
Recommended product routes
- CA-4073 for foam and fabric lamination trials
Sample request checklist
- Both substrates
- Coating equipment
- Line speed and drying
- Current delamination point
- Target aging test
Testing suggestions
Record coat weight, line speed and drying
Check final bond after agreed conditioning
Recommended models
FAQ
Can a lamination adhesive be selected from only one substrate?
No. The second substrate, coating method, drying condition and final conditioning test can all change the result.
Request a sample for this application
Send us your substrate, coating method and current bonding problem. We will suggest a sample route before sending detailed TDS.
Information to include
- Both substrates
- Coating equipment
- Line speed and drying
- Current delamination point
- Target aging test