For water-resistant lamination discussions
Product codeCA-4073
Water-Resistant Lamination Adhesive
Water-based lamination adhesive direction for PU foam, sponge and fabric lamination.
Application fit highlights
Why evaluate CA-4073 for your application
Useful in footwear, bags and packaging materials
Line speed, substrate and drying condition should be checked
What this product is for
CA-4073 is a water-based lamination adhesive route for PU foam, sponge and fabric composites where the buyer needs a water-resistant direction without treating the initial dry bond as final approval.
This page is written for application screening and sample discussion. Final performance should be confirmed with the buyer's substrate, process route, test method and acceptance standard.
Suitable applications
- PU foam lamination
- Bag fabrics
- Protective packaging inserts
Suitable substrates
PU foamSpongeFabricPackaging inserts
Screening information
Only application-facing screening information is listed here. Detailed ranges and final product data should be confirmed by TDS and sample testing.
Product familyWater-based flexible-material lamination adhesive
Application directionPU foam, sponge and fabric lamination
Typical substratesPU foam, sponge, fabric and selected packaging inserts
Data boundaryWater resistance and final bond depend on substrate, coat weight, drying and test method
Process notes and first trial checks
Provide both production substrates because foam density, fabric finish and absorbency affect wet-out and dry film formation.
Record coat weight, line speed, nip or pressing condition and available drying temperature.
Condition the laminate before peel, water and aging checks.
Frequently asked questions
What applications is CA-4073 Water-Resistant Lamination Adhesive suitable for?
CA-4073 Water-Resistant Lamination Adhesive is positioned for PU foam lamination, Bag fabrics, Protective packaging inserts. Final suitability should be confirmed with the buyer's substrate, process and test method.
What information is needed before requesting a sample or quote?
Please provide substrate, surface treatment, coating or bonding method, drying or pressing condition, current failure mode, target test and required documents.
Can Mengze provide TDS or SDS?
TDS or SDS support can be provided after the application route and document need are confirmed.
Common failure modes
- Over-penetration into foam
- Weak bond after water exposure
- Edge delamination after conditioning
- Slow drying or blocking
Sample request checklist
- Both substrate samples
- Foam density or fabric finish
- Coating and pressing method
- Drying window
- Water, peel or aging test method
Related product comparison
Compare with CF-6078 when the difficult surface is PVC decorative film or paperboard.
Related applications
Related products
Request sample, quote or TDS
Send your substrate, coating method, current bonding problem and target test method. We can suggest a sample route before sharing detailed TDS or SDS.
Include these details
- Both substrate samples
- Foam density or fabric finish
- Coating and pressing method
- Drying window
- Water, peel or aging test method