Coat the buyer's actual fabric
Water-Based Anti-Slip Fabric Coating
Anti-slip fabric coating forms a flexible, higher-friction backing layer on mats, automotive floor mats, bags and selected shoe materials. It is a coating route, not a two-substrate bonding adhesive.
Application requirements
What the adhesive route needs to handle
Fabric construction confirmedCoating side and weight recordedDrying window availableFriction, wear and water checks defined
Common substrates
Rug and mat backingAutomotive floor-mat fabricBag fabricShoe insole materialSelected textile backings
Common failure problems
- Insufficient grip
- Coating cracks on bending
- Poor fabric anchoring
- Blocking after stacking
- Whitening after water exposure
Selection logic
Start with the use case, then narrow the route by substrate, process window and failure mode.
Fabric absorptionTarget dry and wet gripCoating method and weightDrying and post-treatmentWear and washing expectation
Recommended product routes
- Application-matched water-based anti-slip coating after fabric and process review
Sample request checklist
- Fabric sample and end product
- Coating side and method
- Target coating weight
- Available drying temperature and time
- Grip, wear, water and washing test method
Testing suggestions
Record coating weight and drying
Check bending, blocking, dry grip, wet grip and wear separately
Product route after application review
No model is listed for this application without reviewing the actual substrate and process. Send the items below and we will identify the closest sample route.
- Fabric sample and end product
- Coating side and method
- Target coating weight
- Available drying temperature and time
- Grip, wear, water and washing test method
Related technical resources
FAQ
Is anti-slip fabric coating the same as a lamination adhesive?
No. It forms a functional coating on the fabric surface or backing. The required grip and wear tests should be defined before sampling.
Can a friction coefficient or wash-cycle target be confirmed before testing?
No. Fabric structure, coat weight, drying and the buyer's test method must be confirmed first.
Request a sample for this application
Send us your substrate, coating method and current bonding problem. We will suggest a sample route before sending detailed TDS.
Information to include
- Fabric sample and end product
- Coating side and method
- Target coating weight
- Available drying temperature and time
- Grip, wear, water and washing test method