Use molded production parts
Plastic Flocking Adhesive
Plastic flocking adhesive selection depends on plastic type, surface energy, release agents, plasticizer migration, pretreatment and abrasion target.
Application requirements
What the adhesive route needs to handle
Plastic identificationSurface energy and contamination checkPretreatment reviewAging and abrasion confirmation
Common substrates
ABSRigid PVCFlexible PVCPPPETPOPC/ABS
Common failure problems
- Poor adhesion on PP or PE
- Plasticizer migration on flexible PVC
- Flock loss after rubbing
- Uneven density or exposed base
Selection logic
Start with the use case, then narrow the route by substrate, process window and failure mode.
ABS vs PVC vs PP/PE routeMold release and oil residuePrimer, flame, corona or plasma requirementAging target
Recommended product routes
- ABS / rigid plastic flocking route
- PVC plastic flocking route
- PP / PE low-surface-energy support route
Sample request checklist
- Plastic type and grade
- Surface treatment or primer
- Flock fiber
- Application method
- Current adhesion failure
Testing suggestions
Check cleaning and activation method
Run abrasion, heat aging and humidity aging when durability matters
Recommended models
AF-4588
AF-4588 ABS Plastic Flocking Adhesive
Water-based flocking adhesive for ABS housings and rigid ABS parts after surface cleaning and production-part testing.
Review product fit VF-4588VF-4588 PVC Plastic Flocking Adhesive
Water-based flocking adhesive for PVC toys, footwear materials and other PVC parts, with formulation and plasticizer effects included in testing.
Review product fitRelated technical resources
Request a sample for this application
Send us your substrate, coating method and current bonding problem. We will suggest a sample route before sending detailed TDS.
Information to include
- Plastic type and grade
- Surface treatment or primer
- Flock fiber
- Application method
- Current adhesion failure