Inspect the existing surface
Construction & Industrial Maintenance
Construction and maintenance routes start with the actual base, moisture, rust or old coating condition before the adhesive or coating system is selected.
Application requirements
What the adhesive route needs to handle
Base or metal condition recordedMoisture, rust or old coating assessedApplication sequence definedProject acceptance method confirmed
Common substrates
Cement basesTile backsWalls and roofsSteel structuresColor steel roofing
Common failure problems
- Poor adhesion
- Peeling
- Rust return
- Cracking
- Water leakage
- Edge or seam failure
Selection logic
Start with the use case, then narrow the route by substrate, process window and failure mode.
Substrate conditionIndoor or outdoor exposureSurface preparationCoating or bonding systemAcceptance test
Recommended product routes
- Application-matched building-surface bonding or coating route
- Application-matched metal-maintenance coating system
Sample request checklist
- Substrate and project area
- Moisture, rust or old coating condition
- Surface preparation plan
- Application method
- Acceptance and document requirements
Testing suggestions
Record cleaning and preparation
Use project-specific adhesion and exposure checks
Product route after application review
No model is listed for this application without reviewing the actual substrate and process. Send the items below and we will identify the closest sample route.
- Substrate and project area
- Moisture, rust or old coating condition
- Surface preparation plan
- Application method
- Acceptance and document requirements
Request a sample for this application
Send us your substrate, coating method and current bonding problem. We will suggest a sample route before sending detailed TDS.
Information to include
- Substrate and project area
- Moisture, rust or old coating condition
- Surface preparation plan
- Application method
- Acceptance and document requirements